Electrical specification

Key RF parameters for Cat-M1

Note: For certification status, please refer to Regulatory information.


Symbol	Description	Typ.	Units
Supported LTE	Supported LTE standards	LTE Rel-14 Cat-M1 HD-FDD
Bands supported	Bands supported	B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66, B85, B106
Transmission bandwidth	Maximum bandwidth	1.4	MHz

Key RF parameters for Cat-NB1 and Cat-NB2

Note: For certification status, please refer to Regulatory information.

Note: There is no foreseen NB-IoT network deployment for FCC bands closer than 200 kHz from band edge, hence our device will not transmit in FCC bands on channels that are closer than 200kHz to band edge.


Symbol	Description	Typ.	Units
Supported LTE	Supported LTE standards	LTE Rel-14 Cat-NB1 and Cat-NB2 HD-FDD
Bands supported	Bands supported	B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B65, B66, B85, B106
Transmission bandwidth	Maximum bandwidth	200	kHz

Key RF parameters for IoT NTN

Note: For certification status, please refer to Regulatory information.

Note: There is no foreseen IoT NTN network deployment for FCC bands closer than 200 kHz from band edge, hence our device will not transmit in FCC bands on channels that are closer than 200kHz to band edge.


Symbol	Description	Typ.	Units
Supported LTE	Supported LTE standards	LTE Rel-17 IoT NTN
Bands supported	Bands supported	B23, B249, B252, B255, B256
Transmission bandwidth	Maximum bandwidth	200	kHz

Receiver parameters for Cat-M1


Symbol	Description	Min.	Typ.	Max.	Units
Freq_{range_ANT_RX}	RX operation frequency range at ANT pin	728		2200	MHz
Z_in	Input impedance, single-ended		50		Ω
Sensitivity, low band	LTE 1.4 MHz without coverage extension	-103	-108		dBm
Sensitivity, mid band	LTE 1.4 MHz without coverage extension	-103	-107		dBm

Receiver parameters for Cat-NB1 and Cat-NB2


Symbol	Description	Min.	Typ.	Max.	Units
Freq_{range_ANT_RX}	RX operation frequency range at ANT pin	728		2200	MHz
Z_in	Input impedance, single-ended		50		Ω
Sensitivity, low band	NB 200 kHz without coverage extension	-108	-114		dBm
Sensitivity, mid band	NB 200 kHz without coverage extension	-108	-113		dBm

Receiver parameters for IoT NTN


Symbol	Description	Min.	Typ.	Max.	Units
Freq_{range_ANT_RX}	RX operation frequency range at ANT pin	728		2200	MHz
Z_in	Input impedance, single-ended		50		Ω
Sensitivity, mid band	NB 200 kHz without coverage extension	-108	-113		dBm

Transmitter parameters for Cat-M1


Symbol	Description	Min.	Typ.	Max.	Units
Freq_{range_ANT_TX}	TX operation frequency range at ANT pin	698		1980	MHz
Z_out	Output impedance, single-ended		50		Ω
PC3 maximum output power	Power Class 3 maximum output power		23		dBm
PC5 maximum output power	Power Class 5 maximum output power		20		dBm
Minimum output power	Minimum output power		-40		dBm
Pout maximum accuracy	Pout maximum accuracy		±2		dB

Transmitter parameters for Cat-NB1 and Cat-NB2


Symbol	Description	Min.	Typ.	Max.	Units
Freq_{range_ANT_TX}	TX operation frequency range at ANT pin	698		2010	MHz
Z_out	Output impedance, single-ended		50		Ω
PC3 maximum output power	Power Class 3 maximum output power		23		dBm
PC5 maximum output power	Power Class 5 maximum output power		20		dBm
Minimum output power	Minimum output power		-40		dBm
Pout maximum accuracy	Pout maximum accuracy		±2		dB

Transmitter parameters for IoT NTN


Symbol	Description	Min.	Typ.	Max.	Units
Freq_{range_ANT_TX}	TX operation frequency range at ANT pin	1616		2020	MHz
Z_out	Output impedance, single-ended		50		Ω
PC3 maximum output power	Power Class 3 maximum output power		23		dBm
PC5 maximum output power	Power Class 5 maximum output power		20		dBm
Minimum output power	Minimum output power		-40		dBm
Pout maximum accuracy	Pout maximum accuracy		±2		dB