Electrical specification
Key RF parameters for Cat-M1
Note: For certification status, please refer to Regulatory information.
| Symbol | Description | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|
| Supported LTE | Supported LTE standards | LTE Rel-13 Cat-M1 HD-FDD | |||
| Bands supported | Bands supported | B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 | |||
| Transmission bandwidth | Maximum bandwidth | 1.4 | MHz |
Key RF parameters for Cat-NB1 and Cat-NB2
Note: For certification status, please refer to Regulatory information.
Note: There is no foreseen NB-IoT network deployment for FCC bands closer than 200 kHz from band edge,
hence our device will not transmit in FCC bands on channels that are closer than 200kHz to band edge.
| Symbol | Description | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|
| Supported LTE | Supported LTE standards | LTE Rel-13 Cat-NB1 HD-FDD, LTE Rel-14 Cat-NB1 and Cat-NB2 HD-FDD | |||
| Bands supported | Bands supported | B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66 | |||
| Transmission bandwidth | Maximum bandwidth | 200 | kHz |
Receiver parameters for Cat-M1
| Symbol | Description | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|
| Freqrange_ANT_RX | RX operation frequency range at ANT pin | 729 | 2200 | MHz | |
| Zin | Input impedance, single-ended | 50 | Ω | ||
| Sensitivity, low band | LTE 1.4 MHz without coverage extension | -103 | -108 | dBm | |
| Sensitivity, mid band | LTE 1.4 MHz without coverage extension | -103 | -107 | dBm |
Receiver parameters for Cat-NB1 and Cat-NB2
| Symbol | Description | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|
| Freqrange_ANT_RX | RX operation frequency range at ANT pin | 729 | 2200 | MHz | |
| Zin | Input impedance, single-ended | 50 | Ω | ||
| Sensitivity, low band | NB 200 kHz without coverage extension | -108 | -114 | dBm | |
| Sensitivity, mid band | NB 200 kHz without coverage extension | -108 | -113 | dBm |
Transmitter parameters for Cat-M1
| Symbol | Description | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|
| Freqrange_ANT_TX | TX operation frequency range at ANT pin | 699 | 1980 | MHz | |
| Zout | Output impedance, single-ended | 50 | Ω | ||
| Maximum output power | Maximum output power | 23 | dBm | ||
| Minimum output power | Minimum output power | -40 | dBm | ||
| Pout maximum accuracy | Pout maximum accuracy | ±2 | dB |
Transmitter parameters for Cat-NB1 and Cat-NB2
| Symbol | Description | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|
| Freqrange_ANT_TX | TX operation frequency range at ANT pin | 699 | 1980 | MHz | |
| Zout | Output impedance, single-ended | 50 | Ω | ||
| Maximum output power | Maximum output power | 23 | dBm | ||
| Minimum output power | Minimum output power | -40 | dBm | ||
| Pout maximum accuracy | Pout maximum accuracy | ±2 | dB |